FAG B7005-C-2RSD-T-P4S spindle bearings | 25x47x12mm
Also known as : B7005-C-2RSD-T-P4S
- Inside Diameter: 25 mm
- Outside Diameter: 47 mm
- Width: 12 mm
- Basic dynamic load rating: 13.7 kN
- Basic static load rating: 5.9 kN
FAG B7005-C-2RSD-T-P4S Bearing
FAG B7005-C-2RSD-T-P4S Bearing details
Number | B7005-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 25 mm | |
D | 47 mm | |
B | 12 mm | |
a | 10,8 mm | |
Da | 42 mm | Tolerance: H12 |
da | 30 mm | Tolerance: h12 |
r1 min | 0,6 mm | |
ra max | 0,6 mm | |
ra1 max | 0,3 mm | |
rmin | 0,6 mm | |
α | 15 ° | Contact angle |
m | 0,076 kg | ≈ Mass |
Cr | 13700 N | Basic dynamic load rating, radial |
C0r | 5900 N | Basic static load rating, radial |
Cur | 610 N | Fatigue limit load, radial |
nG Fett | 34000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 73 N | Preload force |
FV M | 248 N | Preload force |
FV H | 502 N | Preload force |
KaE L | 226 N | Lift-off force |
KaE M | 831 N | Lift-off force |
KaE H | 1807 N | Lift-off force |
ca L | 29,6 N/µm | Axial rigidity |
ca M | 51,2 N/µm | Axial rigidity |
ca H | 73,5 N/µm | Axial rigidity |
Nodes bearings have FAG B7005-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.