FAG B71905-C-2RSD-T-P4S spindle bearings | 25x42x9mm
Also known as : B71905-C-2RSD-T-P4S
- Inside Diameter: 25 mm
- Outside Diameter: 42 mm
- Width: 9 mm
- Basic dynamic load rating: 8 kN
- Basic static load rating: 3.8 kN
FAG B71905-C-2RSD-T-P4S Bearing
FAG B71905-C-2RSD-T-P4S Bearing details
Number | B71905-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 25 mm | |
D | 42 mm | |
B | 9 mm | |
a | 9 mm | |
Da | 38,5 mm | Tolerance: H12 |
da | 29 mm | Tolerance: h12 |
r1 min | 0,3 mm | |
ra max | 0,3 mm | |
ra1 max | 0,15 mm | |
rmin | 0,3 mm | |
α | 15 ° | Contact angle |
m | 0,044 kg | ≈ Mass |
Cr | 8000 N | Basic dynamic load rating, radial |
C0r | 3800 N | Basic static load rating, radial |
Cur | 390 N | Fatigue limit load, radial |
nG Fett | 36000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 34 N | Preload force |
FV M | 127 N | Preload force |
FV H | 265 N | Preload force |
KaE L | 102 N | Lift-off force |
KaE M | 418 N | Lift-off force |
KaE H | 934 N | Lift-off force |
ca L | 24,9 N/µm | Axial rigidity |
ca M | 45,4 N/µm | Axial rigidity |
ca H | 66,3 N/µm | Axial rigidity |
Nodes bearings have FAG B71905-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.