FAG B71911-C-2RSD-T-P4S spindle bearings | 55x80x13mm
Also known as : B71911-C-2RSD-T-P4S
- Inside Diameter: 55 mm
- Outside Diameter: 80 mm
- Width: 13 mm
- Basic dynamic load rating: 23.5 kN
- Basic static load rating: 14.4 kN
FAG B71911-C-2RSD-T-P4S Bearing
FAG B71911-C-2RSD-T-P4S Bearing details
Number | B71911-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 55 mm | |
D | 80 mm | |
B | 13 mm | |
a | 15,5 mm | |
Da | 75,5 mm | Tolerance: H12 |
da | 60 mm | Tolerance: h12 |
r1 min | 1 mm | |
ra max | 0,6 mm | |
ra1 max | 0,3 mm | |
rmin | 1 mm | |
α | 15 ° | Contact angle |
m | 0,173 kg | ≈ Mass |
Cr | 23500 N | Basic dynamic load rating, radial |
C0r | 14400 N | Basic static load rating, radial |
Cur | 1490 N | Fatigue limit load, radial |
nG Fett | 17000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 111 N | Preload force |
FV M | 382 N | Preload force |
FV H | 780 N | Preload force |
KaE L | 340 N | Lift-off force |
KaE M | 1274 N | Lift-off force |
KaE H | 2784 N | Lift-off force |
ca L | 50,8 N/µm | Axial rigidity |
ca M | 88,6 N/µm | Axial rigidity |
ca H | 128 N/µm | Axial rigidity |
Nodes bearings have FAG B71911-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.