FAG B71911-E-T-P4S spindle bearings | 55x80x13mm
Also known as : B71911-E-T-P4S
- Inside Diameter: 55 mm
- Outside Diameter: 80 mm
- Width: 13 mm
- Basic dynamic load rating: 22.2 kN
- Basic static load rating: 13.7 kN
FAG B71911-E-T-P4S Bearing
FAG B71911-E-T-P4S Bearing details
Number | B71911-E-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 55 mm | |
D | 80 mm | |
B | 13 mm | |
a | 22,2 mm | |
Da | 75,5 mm | Tolerance: H12 |
da | 60 mm | Tolerance: h12 |
Etk max | 65,1 mm | |
Etk min | 62,8 mm | |
Etk1 max | 65,1 mm | |
Etk1 min | 62,8 mm | |
r1 min | 1 mm | |
ra max | 0,6 mm | |
ra1 max | 0,3 mm | |
rmin | 1 mm | |
α | 25 ° | Contact angle |
m | 0,174 kg | ≈ Mass |
Cr | 22200 N | Basic dynamic load rating, radial |
C0r | 13700 N | Basic static load rating, radial |
Cur | 1410 N | Fatigue limit load, radial |
nG Fett | 15000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 24000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 149 N | Preload force |
FV M | 588 N | Preload force |
FV H | 1278 N | Preload force |
KaE L | 431 N | Lift-off force |
KaE M | 1768 N | Lift-off force |
KaE H | 3973 N | Lift-off force |
ca L | 115 N/µm | Axial rigidity |
ca M | 193 N/µm | Axial rigidity |
ca H | 266 N/µm | Axial rigidity |
Nodes bearings have FAG B71911-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.