FAG B7012-C-2RSD-T-P4S spindle bearings | 60x95x18mm
Also known as : B7012-C-2RSD-T-P4S
- Inside Diameter: 60 mm
- Outside Diameter: 95 mm
- Width: 18 mm
- Basic dynamic load rating: 40 kN
- Basic static load rating: 23.8 kN
FAG B7012-C-2RSD-T-P4S Bearing
FAG B7012-C-2RSD-T-P4S Bearing details
Number | B7012-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 60 mm | |
D | 95 mm | |
B | 18 mm | |
a | 19,4 mm | |
Da | 88 mm | Tolerance: H12 |
da | 67 mm | Tolerance: h12 |
r1 min | 1,1 mm | |
ra max | 1 mm | |
ra1 max | 0,6 mm | |
rmin | 1,1 mm | |
α | 15 ° | Contact angle |
m | 0,396 kg | ≈ Mass |
Cr | 40000 N | Basic dynamic load rating, radial |
C0r | 23800 N | Basic static load rating, radial |
Cur | 2440 N | Fatigue limit load, radial |
nG Fett | 15000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 209 N | Preload force |
FV M | 687 N | Preload force |
FV H | 1381 N | Preload force |
KaE L | 647 N | Lift-off force |
KaE M | 2304 N | Lift-off force |
KaE H | 4952 N | Lift-off force |
ca L | 64 N/µm | Axial rigidity |
ca M | 110 N/µm | Axial rigidity |
ca H | 157 N/µm | Axial rigidity |
Nodes bearings have FAG B7012-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.