FAG B71912-E-T-P4S spindle bearings | 60x85x13mm
Also known as : B71912-E-T-P4S
- Inside Diameter: 60 mm
- Outside Diameter: 85 mm
- Width: 13 mm
- Basic dynamic load rating: 23.4 kN
- Basic static load rating: 15.2 kN
FAG B71912-E-T-P4S Bearing
FAG B71912-E-T-P4S Bearing details
Number | B71912-E-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 60 mm | |
D | 85 mm | |
B | 13 mm | |
a | 23,4 mm | |
Da | 80,5 mm | Tolerance: H12 |
da | 65 mm | Tolerance: h12 |
Etk max | 70,1 mm | |
Etk min | 67,8 mm | |
Etk1 max | 70,1 mm | |
Etk1 min | 67,8 mm | |
r1 min | 1 mm | |
ra max | 0,6 mm | |
ra1 max | 0,3 mm | |
rmin | 1 mm | |
α | 25 ° | Contact angle |
m | 0,188 kg | ≈ Mass |
Cr | 23400 N | Basic dynamic load rating, radial |
C0r | 15200 N | Basic static load rating, radial |
Cur | 1560 N | Fatigue limit load, radial |
nG Fett | 14000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 22000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 155 N | Preload force |
FV M | 617 N | Preload force |
FV H | 1344 N | Preload force |
KaE L | 448 N | Lift-off force |
KaE M | 1853 N | Lift-off force |
KaE H | 4171 N | Lift-off force |
ca L | 124 N/µm | Axial rigidity |
ca M | 208 N/µm | Axial rigidity |
ca H | 286 N/µm | Axial rigidity |
Nodes bearings have FAG B71912-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.