FAG B7212-E-2RSD-T-P4S spindle bearings | 60x110x22mm
Also known as : B7212-E-2RSD-T-P4S
- Inside Diameter: 60 mm
- Outside Diameter: 110 mm
- Width: 22 mm
- Basic dynamic load rating: 53 kN
- Basic static load rating: 29.5 kN
FAG B7212-E-2RSD-T-P4S Bearing
FAG B7212-E-2RSD-T-P4S Bearing details
Number | B7212-E-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 60 mm | |
D | 110 mm | |
B | 22 mm | |
a | 30,9 mm | |
Da | 101,5 mm | Tolerance: H12 |
da | 69,5 mm | Tolerance: h12 |
r1 min | 1,5 mm | |
ra max | 1,5 mm | |
ra1 max | 0,6 mm | |
rmin | 1,5 mm | |
α | 25 ° | Contact angle |
m | 0,819 kg | ≈ Mass |
Cr | 53000 N | Basic dynamic load rating, radial |
C0r | 29500 N | Basic static load rating, radial |
Cur | 3050 N | Fatigue limit load, radial |
nG Fett | 12000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 463 N | Preload force |
FV M | 1586 N | Preload force |
FV H | 3304 N | Preload force |
KaE L | 1351 N | Lift-off force |
KaE M | 4794 N | Lift-off force |
KaE H | 10334 N | Lift-off force |
ca L | 165 N/µm | Axial rigidity |
ca M | 264 N/µm | Axial rigidity |
ca H | 358 N/µm | Axial rigidity |
Nodes bearings have FAG B7212-E-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, lip seals on both sides, non-contact, restricted tolerances.