FAG B7018-C-2RSD-T-P4S spindle bearings | 90x140x24mm
Also known as : B7018-C-2RSD-T-P4S
- Inside Diameter: 90 mm
- Outside Diameter: 140 mm
- Width: 24 mm
- Basic dynamic load rating: 78 kN
- Basic static load rating: 51 kN
FAG B7018-C-2RSD-T-P4S Bearing
FAG B7018-C-2RSD-T-P4S Bearing details
Number | B7018-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 90 mm | |
D | 140 mm | |
B | 24 mm | |
a | 27,4 mm | |
Da | 131 mm | Tolerance: H12 |
da | 100 mm | Tolerance: h12 |
r1 min | 1,5 mm | |
ra max | 1,5 mm | |
ra1 max | 0,6 mm | |
rmin | 1,5 mm | |
α | 15 ° | Contact angle |
m | 1,15 kg | ≈ Mass |
Cr | 78000 N | Basic dynamic load rating, radial |
C0r | 51000 N | Basic static load rating, radial |
Cur | 4900 N | Fatigue limit load, radial |
nG Fett | 10000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 437 N | Preload force |
FV M | 1395 N | Preload force |
FV H | 2785 N | Preload force |
KaE L | 1347 N | Lift-off force |
KaE M | 4651 N | Lift-off force |
KaE H | 9920 N | Lift-off force |
ca L | 95,2 N/µm | Axial rigidity |
ca M | 161 N/µm | Axial rigidity |
ca H | 229 N/µm | Axial rigidity |
Nodes bearings have FAG B7018-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.