FAG B7218-E-T-P4S spindle bearings | 90x160x30mm
Also known as : B7218-E-T-P4S
- Inside Diameter: 90 mm
- Outside Diameter: 160 mm
- Width: 30 mm
- Basic dynamic load rating: 119 kN
- Basic static load rating: 72 kN
FAG B7218-E-T-P4S Bearing
FAG B7218-E-T-P4S Bearing details
Number | B7218-E-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 90 mm | |
D | 160 mm | |
B | 30 mm | |
a | 44,3 mm | |
Da | 147 mm | Tolerance: H12 |
da | 104 mm | Tolerance: h12 |
Etk max | 120 mm | |
Etk min | 112,1 mm | |
Etk1 max | 120 mm | |
Etk1 min | 112,1 mm | |
r1 min | 2 mm | |
ra max | 2 mm | |
ra1 max | 1 mm | |
rmin | 2 mm | |
α | 25 ° | Contact angle |
m | 2,19 kg | ≈ Mass |
Cr | 119000 N | Basic dynamic load rating, radial |
C0r | 72000 N | Basic static load rating, radial |
Cur | 6600 N | Fatigue limit load, radial |
nG Fett | 7500 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 12000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 1127 N | Preload force |
FV M | 3689 N | Preload force |
FV H | 7575 N | Preload force |
KaE L | 3291 N | Lift-off force |
KaE M | 11132 N | Lift-off force |
KaE H | 23627 N | Lift-off force |
ca L | 257 N/µm | Axial rigidity |
ca M | 404 N/µm | Axial rigidity |
ca H | 545 N/µm | Axial rigidity |
Nodes bearings have FAG B7218-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.