FAG B71918-C-2RSD-T-P4S spindle bearings | 90x125x18mm
Also known as : B71918-C-2RSD-T-P4S
- Inside Diameter: 90 mm
- Outside Diameter: 125 mm
- Width: 18 mm
- Basic dynamic load rating: 48 kN
- Basic static load rating: 35 kN
FAG B71918-C-2RSD-T-P4S Bearing
FAG B71918-C-2RSD-T-P4S Bearing details
Number | B71918-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 90 mm | |
D | 125 mm | |
B | 18 mm | |
a | 23,4 mm | |
Da | 119 mm | Tolerance: H12 |
da | 97 mm | Tolerance: h12 |
r1 min | 1,1 mm | |
ra max | 0,6 mm | |
ra1 max | 0,6 mm | |
rmin | 1,1 mm | |
α | 15 ° | Contact angle |
m | 0,55 kg | ≈ Mass |
Cr | 48000 N | Basic dynamic load rating, radial |
C0r | 35000 N | Basic static load rating, radial |
Cur | 3450 N | Fatigue limit load, radial |
nG Fett | 11000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 238 N | Preload force |
FV M | 796 N | Preload force |
FV H | 1615 N | Preload force |
KaE L | 729 N | Lift-off force |
KaE M | 2628 N | Lift-off force |
KaE H | 5691 N | Lift-off force |
ca L | 81,8 N/µm | Axial rigidity |
ca M | 140 N/µm | Axial rigidity |
ca H | 200 N/µm | Axial rigidity |
Nodes bearings have FAG B71918-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.