FAG B7032-C-T-P4S spindle bearings | 160x240x38mm
Also known as : B7032-C-T-P4S
- Inside Diameter: 160 mm
- Outside Diameter: 240 mm
- Width: 38 mm
- Basic dynamic load rating: 192 kN
- Basic static load rating: 146 kN
FAG B7032-C-T-P4S Bearing
FAG B7032-C-T-P4S Bearing details
| Number | B7032-C-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings, adjusted, in pairs or sets | |
| d | 160 mm | |
| D | 240 mm | |
| B | 38 mm | |
| a | 45,8 mm | |
| Da | 228 mm | Tolerance: H12 |
| da | 174 mm | Tolerance: h12 |
| Etk max | 193,4 mm | |
| Etk min | 184,7 mm | |
| Etk1 max | 193,4 mm | |
| Etk1 min | 184,7 mm | |
| r1 min | 2,1 mm | |
| ra max | 2,1 mm | |
| ra1 max | 1 mm | |
| rmin | 2,1 mm | |
| α | 15 ° | Contact angle |
| m | 5,04 kg | ≈ Mass |
| Cr | 192000 N | Basic dynamic load rating, radial |
| C0r | 146000 N | Basic static load rating, radial |
| Cur | 10600 N | Fatigue limit load, radial |
| nG Fett | 5600 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 8500 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 1145 N | Preload force |
| FV M | 3574 N | Preload force |
| FV H | 7107 N | Preload force |
| KaE L | 3520 N | Lift-off force |
| KaE M | 11821 N | Lift-off force |
| KaE H | 25044 N | Lift-off force |
| ca L | 163 N/µm | Axial rigidity |
| ca M | 271 N/µm | Axial rigidity |
| ca H | 384 N/µm | Axial rigidity |
Nodes bearings have FAG B7032-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.
FAG B7032-C-T-P4S bearing cross reference
FAG B71932-C-T-P4S bearing
160mm x 220mm x 28mm
FAG B7232-C-T-P4S bearing
160mm x 290mm x 48mm
FAG B7032-E-T-P4S bearing
160mm x 240mm x 38mm
FAG B71932-E-T-P4S bearing
160mm x 220mm x 28mm