FAG B7232-C-T-P4S spindle bearings | 160x290x48mm
Also known as : B7232-C-T-P4S
- Inside Diameter: 160 mm
- Outside Diameter: 290 mm
- Width: 48 mm
- Basic dynamic load rating: 249 kN
- Basic static load rating: 202 kN
FAG B7232-C-T-P4S Bearing
FAG B7232-C-T-P4S Bearing details
Number | B7232-C-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 160 mm | |
D | 290 mm | |
B | 48 mm | |
a | 54,1 mm | |
Da | 259 mm | Tolerance: H12 |
da | 191 mm | Tolerance: h12 |
Etk max | 216,9 mm | |
Etk min | 205,9 mm | |
Etk1 max | 216,9 mm | |
Etk1 min | 205,9 mm | |
r1 min | 3 mm | |
ra max | 2,5 mm | |
ra1 max | 2,5 mm | |
rmin | 3 mm | |
α | 15 ° | Contact angle |
m | 12,9 kg | ≈ Mass |
Cr | 249000 N | Basic dynamic load rating, radial |
C0r | 202000 N | Basic static load rating, radial |
Cur | 13800 N | Fatigue limit load, radial |
nG Fett | 4300 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 6300 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 1502 N | Preload force |
FV M | 4659 N | Preload force |
FV H | 9263 N | Preload force |
KaE L | 4601 N | Lift-off force |
KaE M | 15309 N | Lift-off force |
KaE H | 32375 N | Lift-off force |
ca L | 179 N/µm | Axial rigidity |
ca M | 295 N/µm | Axial rigidity |
ca H | 416 N/µm | Axial rigidity |
Nodes bearings have FAG B7232-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.