FAG B71932-C-T-P4S spindle bearings | 160x220x28mm
Also known as : B71932-C-T-P4S
- Inside Diameter: 160 mm
- Outside Diameter: 220 mm
- Width: 28 mm
- Basic dynamic load rating: 128 kN
- Basic static load rating: 106 kN
FAG B71932-C-T-P4S Bearing
FAG B71932-C-T-P4S Bearing details
Number | B71932-C-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 160 mm | |
D | 220 mm | |
B | 28 mm | |
a | 39,5 mm | |
Da | 209 mm | Tolerance: H12 |
da | 170 mm | Tolerance: h12 |
Etk max | 184,7 mm | |
Etk min | 179,5 mm | |
Etk1 max | 184,7 mm | |
Etk1 min | 179,5 mm | |
r1 min | 1 mm | |
ra max | 1 mm | |
ra1 max | 1 mm | |
rmin | 2 mm | |
α | 15 ° | Contact angle |
m | 2,63 kg | ≈ Mass |
Cr | 128000 N | Basic dynamic load rating, radial |
C0r | 106000 N | Basic static load rating, radial |
Cur | 7900 N | Fatigue limit load, radial |
nG Fett | 6000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 9000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 722 N | Preload force |
FV M | 2304 N | Preload force |
FV H | 4619 N | Preload force |
KaE L | 2209 N | Lift-off force |
KaE M | 7572 N | Lift-off force |
KaE H | 16164 N | Lift-off force |
ca L | 145 N/µm | Axial rigidity |
ca M | 243 N/µm | Axial rigidity |
ca H | 344 N/µm | Axial rigidity |
Nodes bearings have FAG B71932-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.