FAG B71902-E-T-P4S spindle bearings | 15x28x7mm
Also known as : B71902-E-T-P4S
- Inside Diameter: 15 mm
- Outside Diameter: 28 mm
- Width: 7 mm
- Basic dynamic load rating: 4.85 kN
- Basic static load rating: 1.94 kN
FAG B71902-E-T-P4S Bearing
FAG B71902-E-T-P4S Bearing details
Number | B71902-E-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 15 mm | |
D | 28 mm | |
B | 7 mm | |
a | 8,6 mm | |
Da | 25,5 mm | Tolerance: H12 |
da | 18 mm | Tolerance: h12 |
Etk max | 20,9 mm | |
Etk min | 19,9 mm | |
Etk1 max | 20,9 mm | |
Etk1 min | 19,9 mm | |
r1 min | 0,3 mm | |
ra max | 0,3 mm | |
ra1 max | 0,1 mm | |
rmin | 0,3 mm | |
α | 25 ° | Contact angle |
m | 0,016 kg | ≈ Mass |
Cr | 4850 N | Basic dynamic load rating, radial |
C0r | 1940 N | Basic static load rating, radial |
Cur | 200 N | Fatigue limit load, radial |
nG Fett | 50000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 75000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 22 N | Preload force |
FV M | 111 N | Preload force |
FV H | 255 N | Preload force |
KaE L | 64 N | Lift-off force |
KaE M | 336 N | Lift-off force |
KaE H | 805 N | Lift-off force |
ca L | 35 N/µm | Axial rigidity |
ca M | 64,7 N/µm | Axial rigidity |
ca H | 91,9 N/µm | Axial rigidity |
Nodes bearings have FAG B71902-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.