FAG B7202-E-T-P4S spindle bearings | 15x35x11mm
Also known as : B7202-E-T-P4S
- Inside Diameter: 15 mm
- Outside Diameter: 35 mm
- Width: 11 mm
- Basic dynamic load rating: 11.1 kN
- Basic static load rating: 4.85 kN
FAG B7202-E-T-P4S Bearing
FAG B7202-E-T-P4S Bearing details
Number | B7202-E-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 15 mm | |
D | 35 mm | |
B | 11 mm | |
a | 11,3 mm | |
Da | 30,5 mm | Tolerance: H12 |
da | 19,5 mm | Tolerance: h12 |
Etk max | 23,4 mm | |
Etk min | 21,7 mm | |
Etk1 max | 23,4 mm | |
Etk1 min | 21,7 mm | |
r1 min | 0,6 mm | |
ra max | 0,6 mm | |
ra1 max | 0,3 mm | |
rmin | 0,6 mm | |
α | 25 ° | Contact angle |
m | 0,044 kg | ≈ Mass |
Cr | 11100 N | Basic dynamic load rating, radial |
C0r | 4850 N | Basic static load rating, radial |
Cur | 510 N | Fatigue limit load, radial |
nG Fett | 40000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 60000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 64 N | Preload force |
FV M | 252 N | Preload force |
FV H | 546 N | Preload force |
KaE L | 187 N | Lift-off force |
KaE M | 768 N | Lift-off force |
KaE H | 1732 N | Lift-off force |
ca L | 49,7 N/µm | Axial rigidity |
ca M | 84,4 N/µm | Axial rigidity |
ca H | 117 N/µm | Axial rigidity |
Nodes bearings have FAG B7202-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.