FAG B7202-C-2RSD-T-P4S spindle bearings | 15x35x11mm
Also known as : B7202-C-2RSD-T-P4S
- Inside Diameter: 15 mm
- Outside Diameter: 35 mm
- Width: 11 mm
- Basic dynamic load rating: 11.6 kN
- Basic static load rating: 5 kN
FAG B7202-C-2RSD-T-P4S Bearing
FAG B7202-C-2RSD-T-P4S Bearing details
Number | B7202-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 15 mm | |
D | 35 mm | |
B | 11 mm | |
a | 8,8 mm | |
Da | 30,5 mm | Tolerance: H12 |
da | 19,5 mm | Tolerance: h12 |
r1 min | 0,6 mm | |
ra max | 0,6 mm | |
ra1 max | 0,3 mm | |
rmin | 0,6 mm | |
α | 15 ° | Contact angle |
m | 0,046 kg | ≈ Mass |
Cr | 11600 N | Basic dynamic load rating, radial |
C0r | 5000 N | Basic static load rating, radial |
Cur | 520 N | Fatigue limit load, radial |
nG Fett | 45000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 46 N | Preload force |
FV M | 158 N | Preload force |
FV H | 319 N | Preload force |
KaE L | 144 N | Lift-off force |
KaE M | 543 N | Lift-off force |
KaE H | 1177 N | Lift-off force |
ca L | 22,1 N/µm | Axial rigidity |
ca M | 39,3 N/µm | Axial rigidity |
ca H | 57 N/µm | Axial rigidity |
Nodes bearings have FAG B7202-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.