FAG B7206-C-2RSD-T-P4S spindle bearings | 30x62x16mm
Also known as : B7206-C-2RSD-T-P4S
- Inside Diameter: 30 mm
- Outside Diameter: 62 mm
- Width: 16 mm
- Basic dynamic load rating: 23.1 kN
- Basic static load rating: 10.4 kN
FAG B7206-C-2RSD-T-P4S Bearing
FAG B7206-C-2RSD-T-P4S Bearing details
Number | B7206-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 30 mm | |
D | 62 mm | |
B | 16 mm | |
a | 14,2 mm | |
Da | 54,5 mm | Tolerance: H12 |
da | 37,5 mm | Tolerance: h12 |
r1 min | 1 mm | |
ra max | 1 mm | |
ra1 max | 0,3 mm | |
rmin | 1 mm | |
α | 15 ° | Contact angle |
m | 0,195 kg | ≈ Mass |
Cr | 23100 N | Basic dynamic load rating, radial |
C0r | 10400 N | Basic static load rating, radial |
Cur | 1070 N | Fatigue limit load, radial |
nG Fett | 24000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 123 N | Preload force |
FV M | 404 N | Preload force |
FV H | 806 N | Preload force |
KaE L | 385 N | Lift-off force |
KaE M | 1375 N | Lift-off force |
KaE H | 2945 N | Lift-off force |
ca L | 39,6 N/µm | Axial rigidity |
ca M | 68,8 N/µm | Axial rigidity |
ca H | 98,9 N/µm | Axial rigidity |
Nodes bearings have FAG B7206-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.