FAG B71907-C-2RSD-T-P4S spindle bearings | 35x55x10mm
Also known as : B71907-C-2RSD-T-P4S
- Inside Diameter: 35 mm
- Outside Diameter: 55 mm
- Width: 10 mm
- Basic dynamic load rating: 12.1 kN
- Basic static load rating: 6.8 kN
FAG B71907-C-2RSD-T-P4S Bearing
FAG B71907-C-2RSD-T-P4S Bearing details
Number | B71907-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 35 mm | |
D | 55 mm | |
B | 10 mm | |
a | 11,1 mm | |
Da | 51,5 mm | Tolerance: H12 |
da | 40 mm | Tolerance: h12 |
r1 min | 0,6 mm | |
ra max | 0,6 mm | |
ra1 max | 0,15 mm | |
rmin | 0,6 mm | |
α | 15 ° | Contact angle |
m | 0,076 kg | ≈ Mass |
Cr | 12100 N | Basic dynamic load rating, radial |
C0r | 6800 N | Basic static load rating, radial |
Cur | 700 N | Fatigue limit load, radial |
nG Fett | 26000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 50 N | Preload force |
FV M | 185 N | Preload force |
FV H | 384 N | Preload force |
KaE L | 155 N | Lift-off force |
KaE M | 619 N | Lift-off force |
KaE H | 1377 N | Lift-off force |
ca L | 33,5 N/µm | Axial rigidity |
ca M | 60,2 N/µm | Axial rigidity |
ca H | 87,5 N/µm | Axial rigidity |
Nodes bearings have FAG B71907-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.