FAG HS7017-E-T-P4S spindle bearings | 85x130x22mm
Also known as : HS7017-E-T-P4S
- Inside Diameter: 85 mm
- Outside Diameter: 130 mm
- Width: 22 mm
- Basic dynamic load rating: 29 kN
- Basic static load rating: 21.4 kN
FAG HS7017-E-T-P4S Bearing
FAG HS7017-E-T-P4S Bearing details
Number | HS7017-E-T-P4S | |
---|---|---|
Type | FAG spindle bearings adjusted, in pairs or sets, contact angle a = 25°, restricted tolerances | |
d | 85 mm | |
D | 130 mm | |
B | 22 mm | |
a | 36,1 mm | |
Da | 122 mm | Tolerance: H12 |
da | 93 mm | Tolerance: h12 |
Etk max | 104,7 mm | |
Etk min | 102,3 mm | |
Etk1 max | 104,7 mm | |
Etk1 min | 99 mm | |
r1 min | 1,1 mm | |
ra max | 1 mm | |
ra1 max | 0,6 mm | |
rmin | 1,1 mm | |
α | 25 ° | Contact angle |
m | 0,969 kg | ≈ Mass |
Cr | 29000 N | Basic dynamic load rating, radial |
C0r | 21400 N | Basic static load rating, radial |
Cur | 2130 N | Fatigue limit load, radial |
nG Fett | 13000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 20000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 173 N | Preload force |
FV M | 518 N | Preload force |
FV H | 1035 N | Preload force |
KaE L | 497 N | Lift-off force |
KaE M | 1520 N | Lift-off force |
KaE H | 3099 N | Lift-off force |
ca L | 151 N/µm | Axial rigidity |
ca M | 224 N/µm | Axial rigidity |
ca H | 292 N/µm | Axial rigidity |
Nodes bearings have FAG HS7017-E-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.