FAG B7017-C-T-P4S spindle bearings | 85x130x22mm
Also known as : B7017-C-T-P4S
- Inside Diameter: 85 mm
- Outside Diameter: 130 mm
- Width: 22 mm
- Basic dynamic load rating: 66 kN
- Basic static load rating: 43.5 kN
FAG B7017-C-T-P4S Bearing
FAG B7017-C-T-P4S Bearing details
Number | B7017-C-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 85 mm | |
D | 130 mm | |
B | 22 mm | |
a | 25,4 mm | |
Da | 122 mm | Tolerance: H12 |
da | 93 mm | Tolerance: h12 |
Etk max | 103,8 mm | |
Etk min | 99 mm | |
Etk1 max | 103,8 mm | |
Etk1 min | 99 mm | |
r1 min | 1,1 mm | |
ra max | 1 mm | |
ra1 max | 0,6 mm | |
rmin | 1,1 mm | |
α | 15 ° | Contact angle |
m | 0,88 kg | ≈ Mass |
Cr | 66000 N | Basic dynamic load rating, radial |
C0r | 43500 N | Basic static load rating, radial |
Cur | 4300 N | Fatigue limit load, radial |
nG Fett | 11000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 16000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 367 N | Preload force |
FV M | 1183 N | Preload force |
FV H | 2368 N | Preload force |
KaE L | 1132 N | Lift-off force |
KaE M | 3942 N | Lift-off force |
KaE H | 8434 N | Lift-off force |
ca L | 89,7 N/µm | Axial rigidity |
ca M | 152 N/µm | Axial rigidity |
ca H | 217 N/µm | Axial rigidity |
Nodes bearings have FAG B7017-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.