FAG B71917-C-T-P4S spindle bearings | 85x120x18mm
Also known as : B71917-C-T-P4S
- Inside Diameter: 85 mm
- Outside Diameter: 120 mm
- Width: 18 mm
- Basic dynamic load rating: 47 kN
- Basic static load rating: 33.5 kN
FAG B71917-C-T-P4S Bearing
FAG B71917-C-T-P4S Bearing details
Number | B71917-C-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 85 mm | |
D | 120 mm | |
B | 18 mm | |
a | 22,7 mm | |
Da | 114 mm | Tolerance: H12 |
da | 92 mm | Tolerance: h12 |
Etk max | 99,3 mm | |
Etk min | 95,9 mm | |
Etk1 max | 99,3 mm | |
Etk1 min | 95,9 mm | |
r1 min | 1,1 mm | |
ra max | 0,6 mm | |
ra1 max | 0,6 mm | |
rmin | 1,1 mm | |
α | 15 ° | Contact angle |
m | 0,53 kg | ≈ Mass |
Cr | 47000 N | Basic dynamic load rating, radial |
C0r | 33500 N | Basic static load rating, radial |
Cur | 3400 N | Fatigue limit load, radial |
nG Fett | 11000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 17000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 237 N | Preload force |
FV M | 788 N | Preload force |
FV H | 1597 N | Preload force |
KaE L | 726 N | Lift-off force |
KaE M | 2609 N | Lift-off force |
KaE H | 5644 N | Lift-off force |
ca L | 79,7 N/µm | Axial rigidity |
ca M | 136 N/µm | Axial rigidity |
ca H | 195 N/µm | Axial rigidity |
Nodes bearings have FAG B71917-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.