FAG HS71902-C-T-P4S Bearing

FAG HS71902-C-T-P4S spindle bearings | 15x28x7mm

Also known as : HS71902-C-T-P4S

• Inside Diameter: 15 mm
• Outside Diameter: 28 mm
• Width: 7 mm
• Basic dynamic load rating: 2.55 kN
• Basic static load rating: 1.04 kN

Inquire Now

FAG HS71902-C-T-P4S Bearing

Number	HS71902-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances
d	15 mm
D	28 mm
B	7 mm
a	6,4 mm
Da	25,5 mm	Tolerance: H12
da	18 mm	Tolerance: h12
Etk max	20,4 mm
Etk min	19,9 mm
Etk1 max	20,4 mm
Etk1 min	18,8 mm
r1 min	0,3 mm
ra max	0,3 mm
ra1 max	0,1 mm
rmin	0,3 mm
α	15 °	Contact angle
m	0,017 kg	≈ Mass
Cr	2550 N	Basic dynamic load rating, radial
C0r	1040 N	Basic static load rating, radial
Cur	107 N	Fatigue limit load, radial
nG Fett	75000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	110000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	9 N	Preload force
FV M	28 N	Preload force
FV H	56 N	Preload force
KaE L	28 N	Lift-off force
KaE M	90 N	Lift-off force
KaE H	188 N	Lift-off force
ca L	11,4 N/µm	Axial rigidity
ca M	18,2 N/µm	Axial rigidity
ca H	25,2 N/µm	Axial rigidity

Nodes bearings have FAG HS71902-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.