FAG HS71911-C-T-P4S Bearing

FAG HS71911-C-T-P4S spindle bearings | 55x80x13mm

Also known as : HS71911-C-T-P4S

• Inside Diameter: 55 mm
• Outside Diameter: 80 mm
• Width: 13 mm
• Basic dynamic load rating: 13 kN
• Basic static load rating: 8.5 kN

Inquire Now

FAG HS71911-C-T-P4S Bearing

Number	HS71911-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances
d	55 mm
D	80 mm
B	13 mm
a	15,5 mm
Da	75,5 mm	Tolerance: H12
da	60 mm	Tolerance: h12
Etk max	65,4 mm
Etk min	64,2 mm
Etk1 max	65,4 mm
Etk1 min	62,1 mm
r1 min	1 mm
ra max	0,6 mm
ra1 max	0,3 mm
rmin	1 mm
α	15 °	Contact angle
m	0,186 kg	≈ Mass
Cr	13000 N	Basic dynamic load rating, radial
C0r	8500 N	Basic static load rating, radial
Cur	870 N	Fatigue limit load, radial
nG Fett	24000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	36000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	45 N	Preload force
FV M	135 N	Preload force
FV H	269 N	Preload force
KaE L	135 N	Lift-off force
KaE M	424 N	Lift-off force
KaE H	882 N	Lift-off force
ca L	37,3 N/µm	Axial rigidity
ca M	58,6 N/µm	Axial rigidity
ca H	80,3 N/µm	Axial rigidity

Nodes bearings have FAG HS71911-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.