FAG HSS71903-C-T-P4S Bearing

FAG HSS71903-C-T-P4S spindle bearings | 17x30x7mm

Also known as : HSS71903-C-T-P4S

• Inside Diameter: 17 mm
• Outside Diameter: 30 mm
• Width: 7 mm
• Basic dynamic load rating: 2.6 kN
• Basic static load rating: 1.13 kN

Inquire Now

FAG HSS71903-C-T-P4S Bearing

Number	HSS71903-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, lip seals on both sides, non-contact, restricted tolerances
d	17 mm
D	30 mm
B	7 mm
a	6,6 mm
Da	27,5 mm	Tolerance: H12
da	20 mm	Tolerance: h12
r1 min	0,3 mm
ra max	0,3 mm
ra1 max	0,1 mm
rmin	0,3 mm
α	15 °	Contact angle
m	0,022 kg	≈ Mass
Cr	2600 N	Basic dynamic load rating, radial
C0r	1130 N	Basic static load rating, radial
Cur	116 N	Fatigue limit load, radial
nG Fett	70000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	10 N	Preload force
FV M	29 N	Preload force
FV H	58 N	Preload force
KaE L	29 N	Lift-off force
KaE M	93 N	Lift-off force
KaE H	194 N	Lift-off force
ca L	12 N/µm	Axial rigidity
ca M	19,2 N/µm	Axial rigidity
ca H	26,5 N/µm	Axial rigidity

Nodes bearings have FAG HSS71903-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.