FAG HSS71908-C-T-P4S Bearing

FAG HSS71908-C-T-P4S spindle bearings | 40x62x12mm

Also known as : HSS71908-C-T-P4S

• Inside Diameter: 40 mm
• Outside Diameter: 62 mm
• Width: 12 mm
• Basic dynamic load rating: 6.8 kN
• Basic static load rating: 4.3 kN

Inquire Now

FAG HSS71908-C-T-P4S Bearing

Number	HSS71908-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, lip seals on both sides, non-contact, restricted tolerances
d	40 mm
D	62 mm
B	12 mm
a	12,8 mm
Da	58,5 mm	Tolerance: H12
da	45 mm	Tolerance: h12
r1 min	0,6 mm
ra max	0,6 mm
ra1 max	0,15 mm
rmin	0,6 mm
α	15 °	Contact angle
m	0,135 kg	≈ Mass
Cr	6800 N	Basic dynamic load rating, radial
C0r	4300 N	Basic static load rating, radial
Cur	445 N	Fatigue limit load, radial
nG Fett	32000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	24 N	Preload force
FV M	72 N	Preload force
FV H	145 N	Preload force
KaE L	72 N	Lift-off force
KaE M	227 N	Lift-off force
KaE H	473 N	Lift-off force
ca L	26,6 N/µm	Axial rigidity
ca M	41,8 N/µm	Axial rigidity
ca H	57,2 N/µm	Axial rigidity

Nodes bearings have FAG HSS71908-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.