FAG B71908-E-2RSD-T-P4S spindle bearings | 40x62x12mm
Also known as : B71908-E-2RSD-T-P4S
- Inside Diameter: 40 mm
- Outside Diameter: 62 mm
- Width: 12 mm
- Basic dynamic load rating: 17.1 kN
- Basic static load rating: 9.4 kN
FAG B71908-E-2RSD-T-P4S Bearing
FAG B71908-E-2RSD-T-P4S Bearing details
Number | B71908-E-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 40 mm | |
D | 62 mm | |
B | 12 mm | |
a | 17,9 mm | |
Da | 58,5 mm | Tolerance: H12 |
da | 45 mm | Tolerance: h12 |
r1 min | 0,6 mm | |
ra max | 0,6 mm | |
ra1 max | 0,15 mm | |
rmin | 0,6 mm | |
α | 25 ° | Contact angle |
m | 0,108 kg | ≈ Mass |
Cr | 17100 N | Basic dynamic load rating, radial |
C0r | 9400 N | Basic static load rating, radial |
Cur | 970 N | Fatigue limit load, radial |
nG Fett | 20000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 111 N | Preload force |
FV M | 447 N | Preload force |
FV H | 974 N | Preload force |
KaE L | 324 N | Lift-off force |
KaE M | 1348 N | Lift-off force |
KaE H | 3043 N | Lift-off force |
ca L | 91,3 N/µm | Axial rigidity |
ca M | 155 N/µm | Axial rigidity |
ca H | 213 N/µm | Axial rigidity |
Nodes bearings have FAG B71908-E-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, lip seals on both sides, non-contact, restricted tolerances.