P6 class tolerances for radial bearings
P6 class tolerances for radial bearings, except tapered roller bearings, inner ring, outer ring....
Date: 2017-12-18
P6 class tolerances for radial bearings, except tapered roller bearings, inner ring, outer ring....
Date: 2017-12-18
P5 class tolerances for radial bearings, except tapered roller bearings, inner ring, outer ring....
Date: 2017-12-18
The suffix M1 of FAG cylindrical roller bearings indicates bearings with brass cages guided by rollers. FAG cylindrical roller bearings with the suffix TVP2 have a cage made from glass fibre reinforced polyamide PA66. Check the chemical resistance of...
Date: 2017-12-13
FAG spherical roller bearings with a rigid central rib on the inner ring (design without suffix E1) have solid cages or sheet metal cages made from brass....
Date: 2017-12-13
FAG spherical roller bearings are also available, with the exception of series 233..-A, with inner rings having a tapered bore. FAG bearings with the suffix K have a bore taper 1:12...
Date: 2017-12-13
Matched single row deep groove ball bearings, O arrangement, DB; X arrangement, DF; Tandem arrangement, DT...
Date: 2017-12-13
FAG open deep groove ball bearings can be used up to an operating temperature of +120 °C...
Date: 2017-12-13
FAG single row angular contact ball bearings can support axial forces in one direction and high radial forces....
Date: 2017-12-13
FAG angular contact ball bearings with solid cages made from glass fibre reinforced polyamide have the suffix TVP or TVH....
Date: 2017-12-13
FAG angular contact ball bearings of the universal designsUA, UL or UOare available not only in the normal tolerance (no tolerance suffix) but also by agreement in thetolerance class P5(suffixP5-UL or P5-UA). The following exceptions apply: bore tole...
Date: 2017-12-13
Axial internal clearance or preload ofFAG bearing series70..-B, 72..-B and 73..-Bof universal design, in pairs in an X or O arrangement. The axial internal clearance or freedom from clearance do not apply to fitted bearing pairs. If rigid fits are us...
Date: 2017-12-13
FAG cylindrical roller bearings suffixes for available designs Suffix Description Design C3 Radial internal clearance larger than normal by agreement C4 Radial internal clearance larger than C3 J30P Black oxide coated E Increased capacity design Stan...
Date: 2017-12-13
FAG tapered roller bearings suffixes for available designs:N11CA-A: Two tapered roller bearings matched in an X arrangement, with an intermediate ring between the outer rings....
Date: 2017-12-13
FAG axial spherical roller bearings can be swivelled about their central position by a few degrees. As a result, they permit skewing between the housing and shaft locating washer and can thus compensate misalignments, shaft deflections and housing de...
Date: 2017-12-13
FAG axial spherical roller bearing cages and suffixes, suffix MB have a solid brass cage that is guided on the shaft locating washer....
Date: 2017-12-13