FAG B7001-E-T-P4S spindle bearings | 12x28x8mm
Also known as : B7001-E-T-P4S
- Inside Diameter: 12 mm
- Outside Diameter: 28 mm
- Width: 8 mm
- Basic dynamic load rating: 4.45 kN
- Basic static load rating: 1.75 kN
FAG B7001-E-T-P4S Bearing
FAG B7001-E-T-P4S Bearing details
Number | B7001-E-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 12 mm | |
D | 28 mm | |
B | 8 mm | |
a | 8,7 mm | |
Da | 24,5 mm | Tolerance: H12 |
da | 16,5 mm | Tolerance: h12 |
Etk max | 18,8 mm | |
Etk min | 17,9 mm | |
Etk1 max | 18,8 mm | |
Etk1 min | 17,9 mm | |
r1 min | 0,3 mm | |
ra max | 0,3 mm | |
ra1 max | 0,1 mm | |
rmin | 0,3 mm | |
α | 25 ° | Contact angle |
m | 0,023 kg | ≈ Mass |
Cr | 4450 N | Basic dynamic load rating, radial |
C0r | 1750 N | Basic static load rating, radial |
Cur | 180 N | Fatigue limit load, radial |
nG Fett | 53000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 85000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 23 N | Preload force |
FV M | 109 N | Preload force |
FV H | 248 N | Preload force |
KaE L | 66 N | Lift-off force |
KaE M | 328 N | Lift-off force |
KaE H | 775 N | Lift-off force |
ca L | 31,8 N/µm | Axial rigidity |
ca M | 57,2 N/µm | Axial rigidity |
ca H | 80,3 N/µm | Axial rigidity |
Nodes bearings have FAG B7001-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.