FAG B7201-C-T-P4S spindle bearings | 12x32x10mm
Also known as : B7201-C-T-P4S
- Inside Diameter: 12 mm
- Outside Diameter: 32 mm
- Width: 10 mm
- Basic dynamic load rating: 9.1 kN
- Basic static load rating: 3.9 kN
FAG B7201-C-T-P4S Bearing
FAG B7201-C-T-P4S Bearing details
Number | B7201-C-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 12 mm | |
D | 32 mm | |
B | 10 mm | |
a | 8 mm | |
Da | 27,5 mm | Tolerance: H12 |
da | 16,5 mm | Tolerance: h12 |
Etk max | 21,1 mm | |
Etk min | 19,6 mm | |
Etk1 max | 21,1 mm | |
Etk1 min | 19,6 mm | |
r1 min | 0,6 mm | |
ra max | 0,6 mm | |
ra1 max | 0,3 mm | |
rmin | 0,6 mm | |
α | 15 ° | Contact angle |
m | 0,037 kg | ≈ Mass |
Cr | 9100 N | Basic dynamic load rating, radial |
C0r | 3900 N | Basic static load rating, radial |
Cur | 400 N | Fatigue limit load, radial |
nG Fett | 50000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 75000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 35 N | Preload force |
FV M | 123 N | Preload force |
FV H | 248 N | Preload force |
KaE L | 109 N | Lift-off force |
KaE M | 420 N | Lift-off force |
KaE H | 916 N | Lift-off force |
ca L | 19,3 N/µm | Axial rigidity |
ca M | 34,6 N/µm | Axial rigidity |
ca H | 50,3 N/µm | Axial rigidity |
Nodes bearings have FAG B7201-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.