FAG B7201-E-T-P4S Bearing

FAG B7201-E-T-P4S spindle bearings | 12x32x10mm

Also known as : B7201-E-T-P4S

  • Inside Diameter: 12 mm
  • Outside Diameter: 32 mm
  • Width: 10 mm
  • Basic dynamic load rating: 8.8 kN
  • Basic static load rating: 3.75 kN

Inquire Now


FAG B7201-E-T-P4S Bearing

FAG B7201-E-T-P4S Bearing details

Number B7201-E-T-P4S  
Type FAG spindle bearings, adjusted, in pairs or sets  
d 12 mm   
D 32 mm   
B 10 mm   
a 10,2 mm   
Da 27,5 mm  Tolerance: H12
da 16,5 mm  Tolerance: h12
Etk max 21,1 mm   
Etk min 19,6 mm   
Etk1 max 21,1 mm   
Etk1 min 19,6 mm   
r1 min 0,6 mm   
ra max 0,6 mm   
ra1 max 0,3 mm   
rmin 0,6 mm   
α 25 °  Contact angle
m 0,037 kg  ≈ Mass
Cr 8800 N  Basic dynamic load rating, radial
C0r 3750 N  Basic static load rating, radial
Cur 385 N  Fatigue limit load, radial
nG Fett 45000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
nG Öl 67000 1/min  Limiting speed for minimal quantity oil lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 47 N  Preload force
FV M 193 N  Preload force
FV H 423 N  Preload force
KaE L 137 N  Lift-off force
KaE M 588 N  Lift-off force
KaE H 1342 N  Lift-off force
ca L 42,8 N/µm  Axial rigidity
ca M 73,9 N/µm  Axial rigidity
ca H 103 N/µm  Axial rigidity

Nodes bearings have FAG B7201-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.

FAG B7201-E-T-P4S bearing cross reference

FAG spindle bearings

Related Information

Product search