FAG B71901-C-2RSD-T-P4S spindle bearings | 12x24x6mm
Also known as : B71901-C-2RSD-T-P4S
- Inside Diameter: 12 mm
- Outside Diameter: 24 mm
- Width: 6 mm
- Basic dynamic load rating: 3.4 kN
- Basic static load rating: 1.31 kN
FAG B71901-C-2RSD-T-P4S Bearing
FAG B71901-C-2RSD-T-P4S Bearing details
Number | B71901-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 12 mm | |
D | 24 mm | |
B | 6 mm | |
a | 5,4 mm | |
Da | 21,5 mm | Tolerance: H12 |
da | 15 mm | Tolerance: h12 |
r1 min | 0,3 mm | |
ra max | 0,3 mm | |
ra1 max | 0,1 mm | |
rmin | 0,3 mm | |
α | 15 ° | Contact angle |
m | 0,012 kg | ≈ Mass |
Cr | 3400 N | Basic dynamic load rating, radial |
C0r | 1310 N | Basic static load rating, radial |
Cur | 135 N | Fatigue limit load, radial |
nG Fett | 67000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 11 N | Preload force |
FV M | 46 N | Preload force |
FV H | 97 N | Preload force |
KaE L | 34 N | Lift-off force |
KaE M | 155 N | Lift-off force |
KaE H | 355 N | Lift-off force |
ca L | 12,6 N/µm | Axial rigidity |
ca M | 24,1 N/µm | Axial rigidity |
ca H | 35,7 N/µm | Axial rigidity |
Nodes bearings have FAG B71901-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.