FAG B7008-C-2RSD-T-P4S spindle bearings | 40x68x15mm
Also known as : B7008-C-2RSD-T-P4S
- Inside Diameter: 40 mm
- Outside Diameter: 68 mm
- Width: 15 mm
- Basic dynamic load rating: 20.9 kN
- Basic static load rating: 11.2 kN
FAG B7008-C-2RSD-T-P4S Bearing
FAG B7008-C-2RSD-T-P4S Bearing details
Number | B7008-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 40 mm | |
D | 68 mm | |
B | 15 mm | |
a | 14,7 mm | |
Da | 62 mm | Tolerance: H12 |
da | 46 mm | Tolerance: h12 |
r1 min | 1 mm | |
ra max | 1 mm | |
ra1 max | 0,3 mm | |
rmin | 1 mm | |
α | 15 ° | Contact angle |
m | 0,188 kg | ≈ Mass |
Cr | 20900 N | Basic dynamic load rating, radial |
C0r | 11200 N | Basic static load rating, radial |
Cur | 1150 N | Fatigue limit load, radial |
nG Fett | 22000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 101 N | Preload force |
FV M | 344 N | Preload force |
FV H | 698 N | Preload force |
KaE L | 312 N | Lift-off force |
KaE M | 1157 N | Lift-off force |
KaE H | 2515 N | Lift-off force |
ca L | 43,2 N/µm | Axial rigidity |
ca M | 75,6 N/µm | Axial rigidity |
ca H | 109 N/µm | Axial rigidity |
Nodes bearings have FAG B7008-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.