FAG B7010-C-2RSD-T-P4S spindle bearings | 50x80x16mm
Also known as : B7010-C-2RSD-T-P4S
- Inside Diameter: 50 mm
- Outside Diameter: 80 mm
- Width: 16 mm
- Basic dynamic load rating: 29 kN
- Basic static load rating: 16.1 kN
FAG B7010-C-2RSD-T-P4S Bearing
FAG B7010-C-2RSD-T-P4S Bearing details
Number | B7010-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 50 mm | |
D | 80 mm | |
B | 16 mm | |
a | 16,7 mm | |
Da | 74 mm | Tolerance: H12 |
da | 56 mm | Tolerance: h12 |
r1 min | 1 mm | |
ra max | 1 mm | |
ra1 max | 0,3 mm | |
rmin | 1 mm | |
α | 15 ° | Contact angle |
m | 0,25 kg | ≈ Mass |
Cr | 29000 N | Basic dynamic load rating, radial |
C0r | 16100 N | Basic static load rating, radial |
Cur | 1660 N | Fatigue limit load, radial |
nG Fett | 18000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 148 N | Preload force |
FV M | 493 N | Preload force |
FV H | 994 N | Preload force |
KaE L | 459 N | Lift-off force |
KaE M | 1659 N | Lift-off force |
KaE H | 3579 N | Lift-off force |
ca L | 52,3 N/µm | Axial rigidity |
ca M | 90,5 N/µm | Axial rigidity |
ca H | 130 N/µm | Axial rigidity |
Nodes bearings have FAG B7010-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.