FAG B7210-E-2RSD-T-P4S spindle bearings | 50x90x20mm
Also known as : B7210-E-2RSD-T-P4S
- Inside Diameter: 50 mm
- Outside Diameter: 90 mm
- Width: 20 mm
- Basic dynamic load rating: 41 kN
- Basic static load rating: 21.4 kN
FAG B7210-E-2RSD-T-P4S Bearing
FAG B7210-E-2RSD-T-P4S Bearing details
Number | B7210-E-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 50 mm | |
D | 90 mm | |
B | 20 mm | |
a | 26,3 mm | |
Da | 83 mm | Tolerance: H12 |
da | 57 mm | Tolerance: h12 |
r1 min | 1,1 mm | |
ra max | 1 mm | |
ra1 max | 0,6 mm | |
rmin | 1,1 mm | |
α | 25 ° | Contact angle |
m | 0,465 kg | ≈ Mass |
Cr | 41000 N | Basic dynamic load rating, radial |
C0r | 21400 N | Basic static load rating, radial |
Cur | 2200 N | Fatigue limit load, radial |
nG Fett | 14000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 352 N | Preload force |
FV M | 1221 N | Preload force |
FV H | 2553 N | Preload force |
KaE L | 1027 N | Lift-off force |
KaE M | 3697 N | Lift-off force |
KaE H | 8006 N | Lift-off force |
ca L | 138 N/µm | Axial rigidity |
ca M | 223 N/µm | Axial rigidity |
ca H | 303 N/µm | Axial rigidity |
Nodes bearings have FAG B7210-E-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, lip seals on both sides, non-contact, restricted tolerances.