FAG B7210-C-2RSD-T-P4S spindle bearings | 50x90x20mm
Also known as : B7210-C-2RSD-T-P4S
- Inside Diameter: 50 mm
- Outside Diameter: 90 mm
- Width: 20 mm
- Basic dynamic load rating: 43 kN
- Basic static load rating: 22.4 kN
FAG B7210-C-2RSD-T-P4S Bearing
FAG B7210-C-2RSD-T-P4S Bearing details
Number | B7210-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 50 mm | |
D | 90 mm | |
B | 20 mm | |
a | 19,4 mm | |
Da | 83 mm | Tolerance: H12 |
da | 57 mm | Tolerance: h12 |
r1 min | 1,1 mm | |
ra max | 1 mm | |
ra1 max | 0,6 mm | |
rmin | 1,1 mm | |
α | 15 ° | Contact angle |
m | 0,467 kg | ≈ Mass |
Cr | 43000 N | Basic dynamic load rating, radial |
C0r | 22400 N | Basic static load rating, radial |
Cur | 2300 N | Fatigue limit load, radial |
nG Fett | 16000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 240 N | Preload force |
FV M | 771 N | Preload force |
FV H | 1534 N | Preload force |
KaE L | 746 N | Lift-off force |
KaE M | 2606 N | Lift-off force |
KaE H | 5556 N | Lift-off force |
ca L | 59,9 N/µm | Axial rigidity |
ca M | 103 N/µm | Axial rigidity |
ca H | 147 N/µm | Axial rigidity |
Nodes bearings have FAG B7210-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.