FAG B7013-C-2RSD-T-P4S spindle bearings | 65x100x18mm
Also known as : B7013-C-2RSD-T-P4S
- Inside Diameter: 65 mm
- Outside Diameter: 100 mm
- Width: 18 mm
- Basic dynamic load rating: 41.5 kN
- Basic static load rating: 25.5 kN
FAG B7013-C-2RSD-T-P4S Bearing
FAG B7013-C-2RSD-T-P4S Bearing details
Number | B7013-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 65 mm | |
D | 100 mm | |
B | 18 mm | |
a | 20,1 mm | |
Da | 93 mm | Tolerance: H12 |
da | 72 mm | Tolerance: h12 |
r1 min | 1,1 mm | |
ra max | 1 mm | |
ra1 max | 0,6 mm | |
rmin | 1,1 mm | |
α | 15 ° | Contact angle |
m | 0,421 kg | ≈ Mass |
Cr | 41500 N | Basic dynamic load rating, radial |
C0r | 25500 N | Basic static load rating, radial |
Cur | 2600 N | Fatigue limit load, radial |
nG Fett | 14000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 214 N | Preload force |
FV M | 704 N | Preload force |
FV H | 1417 N | Preload force |
KaE L | 660 N | Lift-off force |
KaE M | 2354 N | Lift-off force |
KaE H | 5068 N | Lift-off force |
ca L | 66,7 N/µm | Axial rigidity |
ca M | 114 N/µm | Axial rigidity |
ca H | 164 N/µm | Axial rigidity |
Nodes bearings have FAG B7013-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.