FAG B71913-E-2RSD-T-P4S spindle bearings | 65x90x13mm
Also known as : B71913-E-2RSD-T-P4S
- Inside Diameter: 65 mm
- Outside Diameter: 90 mm
- Width: 13 mm
- Basic dynamic load rating: 23.7 kN
- Basic static load rating: 16 kN
FAG B71913-E-2RSD-T-P4S Bearing
FAG B71913-E-2RSD-T-P4S Bearing details
Number | B71913-E-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 65 mm | |
D | 90 mm | |
B | 13 mm | |
a | 24,6 mm | |
Da | 85,5 mm | Tolerance: H12 |
da | 70 mm | Tolerance: h12 |
r1 min | 1 mm | |
ra max | 0,6 mm | |
ra1 max | 0,3 mm | |
rmin | 1 mm | |
α | 25 ° | Contact angle |
m | 0,199 kg | ≈ Mass |
Cr | 23700 N | Basic dynamic load rating, radial |
C0r | 16000 N | Basic static load rating, radial |
Cur | 1640 N | Fatigue limit load, radial |
nG Fett | 13000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 152 N | Preload force |
FV M | 613 N | Preload force |
FV H | 1339 N | Preload force |
KaE L | 440 N | Lift-off force |
KaE M | 1837 N | Lift-off force |
KaE H | 4145 N | Lift-off force |
ca L | 126 N/µm | Axial rigidity |
ca M | 213 N/µm | Axial rigidity |
ca H | 293 N/µm | Axial rigidity |
Nodes bearings have FAG B71913-E-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, lip seals on both sides, non-contact, restricted tolerances.