FAG B71913-C-T-P4S spindle bearings | 65x90x13mm
Also known as : B71913-C-T-P4S
- Inside Diameter: 65 mm
- Outside Diameter: 90 mm
- Width: 13 mm
- Basic dynamic load rating: 25 kN
- Basic static load rating: 16.9 kN
FAG B71913-C-T-P4S Bearing
FAG B71913-C-T-P4S Bearing details
Number | B71913-C-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 65 mm | |
D | 90 mm | |
B | 13 mm | |
a | 16,9 mm | |
Da | 85,5 mm | Tolerance: H12 |
da | 70 mm | Tolerance: h12 |
Etk max | 75,1 mm | |
Etk min | 72,8 mm | |
Etk1 max | 75,1 mm | |
Etk1 min | 72,8 mm | |
r1 min | 1 mm | |
ra max | 0,6 mm | |
ra1 max | 0,3 mm | |
rmin | 1 mm | |
α | 15 ° | Contact angle |
m | 0,2 kg | ≈ Mass |
Cr | 25000 N | Basic dynamic load rating, radial |
C0r | 16900 N | Basic static load rating, radial |
Cur | 1740 N | Fatigue limit load, radial |
nG Fett | 15000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 22000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 117 N | Preload force |
FV M | 409 N | Preload force |
FV H | 839 N | Preload force |
KaE L | 360 N | Lift-off force |
KaE M | 1356 N | Lift-off force |
KaE H | 2973 N | Lift-off force |
ca L | 56,2 N/µm | Axial rigidity |
ca M | 98,1 N/µm | Axial rigidity |
ca H | 141 N/µm | Axial rigidity |
Nodes bearings have FAG B71913-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.