FAG B7213-C-2RSD-T-P4S spindle bearings | 65x120x23mm
Also known as : B7213-C-2RSD-T-P4S
- Inside Diameter: 65 mm
- Outside Diameter: 120 mm
- Width: 23 mm
- Basic dynamic load rating: 68 kN
- Basic static load rating: 38.5 kN
FAG B7213-C-2RSD-T-P4S Bearing
FAG B7213-C-2RSD-T-P4S Bearing details
Number | B7213-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 65 mm | |
D | 120 mm | |
B | 23 mm | |
a | 23,9 mm | |
Da | 109,5 mm | Tolerance: H12 |
da | 75,5 mm | Tolerance: h12 |
r1 min | 1,5 mm | |
ra max | 1,5 mm | |
ra1 max | 0,6 mm | |
rmin | 1,5 mm | |
α | 15 ° | Contact angle |
m | 1,03 kg | ≈ Mass |
Cr | 68000 N | Basic dynamic load rating, radial |
C0r | 38500 N | Basic static load rating, radial |
Cur | 3950 N | Fatigue limit load, radial |
nG Fett | 12000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 386 N | Preload force |
FV M | 1224 N | Preload force |
FV H | 2431 N | Preload force |
KaE L | 1198 N | Lift-off force |
KaE M | 4118 N | Lift-off force |
KaE H | 8752 N | Lift-off force |
ca L | 78,9 N/µm | Axial rigidity |
ca M | 134 N/µm | Axial rigidity |
ca H | 191 N/µm | Axial rigidity |
Nodes bearings have FAG B7213-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.