FAG B7014-C-2RSD-T-P4S spindle bearings | 70x110x20mm
Also known as : B7014-C-2RSD-T-P4S
- Inside Diameter: 70 mm
- Outside Diameter: 110 mm
- Width: 20 mm
- Basic dynamic load rating: 50 kN
- Basic static load rating: 30.5 kN
FAG B7014-C-2RSD-T-P4S Bearing
FAG B7014-C-2RSD-T-P4S Bearing details
Number | B7014-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 70 mm | |
D | 110 mm | |
B | 20 mm | |
a | 22,1 mm | |
Da | 102 mm | Tolerance: H12 |
da | 77 mm | Tolerance: h12 |
r1 min | 1,1 mm | |
ra max | 1 mm | |
ra1 max | 0,6 mm | |
rmin | 1,1 mm | |
α | 15 ° | Contact angle |
m | 0,59 kg | ≈ Mass |
Cr | 50000 N | Basic dynamic load rating, radial |
C0r | 30500 N | Basic static load rating, radial |
Cur | 3150 N | Fatigue limit load, radial |
nG Fett | 13000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 276 N | Preload force |
FV M | 894 N | Preload force |
FV H | 1790 N | Preload force |
KaE L | 853 N | Lift-off force |
KaE M | 2995 N | Lift-off force |
KaE H | 6414 N | Lift-off force |
ca L | 73,5 N/µm | Axial rigidity |
ca M | 125 N/µm | Axial rigidity |
ca H | 179 N/µm | Axial rigidity |
Nodes bearings have FAG B7014-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.