FAG B71914-C-T-P4S spindle bearings | 70x100x16mm
Also known as : B71914-C-T-P4S
- Inside Diameter: 70 mm
- Outside Diameter: 100 mm
- Width: 16 mm
- Basic dynamic load rating: 34.5 kN
- Basic static load rating: 23 kN
FAG B71914-C-T-P4S Bearing
FAG B71914-C-T-P4S Bearing details
Number | B71914-C-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 70 mm | |
D | 100 mm | |
B | 16 mm | |
a | 19,4 mm | |
Da | 94,5 mm | Tolerance: H12 |
da | 76 mm | Tolerance: h12 |
Etk max | 82,2 mm | |
Etk min | 79,3 mm | |
Etk1 max | 82,2 mm | |
Etk1 min | 79,3 mm | |
r1 min | 1 mm | |
ra max | 0,6 mm | |
ra1 max | 0,3 mm | |
rmin | 1 mm | |
α | 15 ° | Contact angle |
m | 0,33 kg | ≈ Mass |
Cr | 34500 N | Basic dynamic load rating, radial |
C0r | 23000 N | Basic static load rating, radial |
Cur | 2360 N | Fatigue limit load, radial |
nG Fett | 14000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 20000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 170 N | Preload force |
FV M | 576 N | Preload force |
FV H | 1171 N | Preload force |
KaE L | 523 N | Lift-off force |
KaE M | 1912 N | Lift-off force |
KaE H | 4155 N | Lift-off force |
ca L | 66 N/µm | Axial rigidity |
ca M | 114 N/µm | Axial rigidity |
ca H | 163 N/µm | Axial rigidity |
Nodes bearings have FAG B71914-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.