FAG B7214-C-2RSD-T-P4S spindle bearings | 70x125x24mm
Also known as : B7214-C-2RSD-T-P4S
- Inside Diameter: 70 mm
- Outside Diameter: 125 mm
- Width: 24 mm
- Basic dynamic load rating: 71 kN
- Basic static load rating: 41.5 kN
FAG B7214-C-2RSD-T-P4S Bearing
FAG B7214-C-2RSD-T-P4S Bearing details
Number | B7214-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 70 mm | |
D | 125 mm | |
B | 24 mm | |
a | 25,1 mm | |
Da | 115 mm | Tolerance: H12 |
da | 80 mm | Tolerance: h12 |
r1 min | 1,5 mm | |
ra max | 1,5 mm | |
ra1 max | 0,6 mm | |
rmin | 1,5 mm | |
α | 15 ° | Contact angle |
m | 1,1 kg | ≈ Mass |
Cr | 71000 N | Basic dynamic load rating, radial |
C0r | 41500 N | Basic static load rating, radial |
Cur | 4250 N | Fatigue limit load, radial |
nG Fett | 11000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 399 N | Preload force |
FV M | 1269 N | Preload force |
FV H | 2524 N | Preload force |
KaE L | 1238 N | Lift-off force |
KaE M | 4260 N | Lift-off force |
KaE H | 9062 N | Lift-off force |
ca L | 83,1 N/µm | Axial rigidity |
ca M | 141 N/µm | Axial rigidity |
ca H | 201 N/µm | Axial rigidity |
Nodes bearings have FAG B7214-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.