FAG B71914-E-T-P4S spindle bearings | 70x100x16mm
Also known as : B71914-E-T-P4S
- Inside Diameter: 70 mm
- Outside Diameter: 100 mm
- Width: 16 mm
- Basic dynamic load rating: 32.5 kN
- Basic static load rating: 21.8 kN
FAG B71914-E-T-P4S Bearing
FAG B71914-E-T-P4S Bearing details
Number | B71914-E-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 70 mm | |
D | 100 mm | |
B | 16 mm | |
a | 27,8 mm | |
Da | 94,5 mm | Tolerance: H12 |
da | 76 mm | Tolerance: h12 |
Etk max | 82,2 mm | |
Etk min | 79,3 mm | |
Etk1 max | 82,2 mm | |
Etk1 min | 79,3 mm | |
r1 min | 1 mm | |
ra max | 0,6 mm | |
ra1 max | 0,3 mm | |
rmin | 1 mm | |
α | 25 ° | Contact angle |
m | 0,33 kg | ≈ Mass |
Cr | 32500 N | Basic dynamic load rating, radial |
C0r | 21800 N | Basic static load rating, radial |
Cur | 2240 N | Fatigue limit load, radial |
nG Fett | 12000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 19000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 233 N | Preload force |
FV M | 886 N | Preload force |
FV H | 1902 N | Preload force |
KaE L | 677 N | Lift-off force |
KaE M | 2658 N | Lift-off force |
KaE H | 5898 N | Lift-off force |
ca L | 151 N/µm | Axial rigidity |
ca M | 249 N/µm | Axial rigidity |
ca H | 341 N/µm | Axial rigidity |
Nodes bearings have FAG B71914-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.