FAG B71922-C-2RSD-T-P4S spindle bearings | 110x150x20mm
Also known as : B71922-C-2RSD-T-P4S
- Inside Diameter: 110 mm
- Outside Diameter: 150 mm
- Width: 20 mm
- Basic dynamic load rating: 61 kN
- Basic static load rating: 47 kN
FAG B71922-C-2RSD-T-P4S Bearing
FAG B71922-C-2RSD-T-P4S Bearing details
Number | B71922-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 110 mm | |
D | 150 mm | |
B | 20 mm | |
a | 27,4 mm | |
Da | 143 mm | Tolerance: H12 |
da | 117 mm | Tolerance: h12 |
r1 min | 1,1 mm | |
ra max | 0,6 mm | |
ra1 max | 0,6 mm | |
rmin | 1,1 mm | |
α | 15 ° | Contact angle |
m | 0,85 kg | ≈ Mass |
Cr | 61000 N | Basic dynamic load rating, radial |
C0r | 47000 N | Basic static load rating, radial |
Cur | 4250 N | Fatigue limit load, radial |
nG Fett | 8500 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 314 N | Preload force |
FV M | 1038 N | Preload force |
FV H | 2102 N | Preload force |
KaE L | 961 N | Lift-off force |
KaE M | 3415 N | Lift-off force |
KaE H | 7373 N | Lift-off force |
ca L | 96,1 N/µm | Axial rigidity |
ca M | 163 N/µm | Axial rigidity |
ca H | 232 N/µm | Axial rigidity |
Nodes bearings have FAG B71922-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.