FAG B7222-E-T-P4S spindle bearings | 110x200x38mm
Also known as : B7222-E-T-P4S
- Inside Diameter: 110 mm
- Outside Diameter: 200 mm
- Width: 38 mm
- Basic dynamic load rating: 156 kN
- Basic static load rating: 100 kN
FAG B7222-E-T-P4S Bearing
FAG B7222-E-T-P4S Bearing details
Number | B7222-E-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 110 mm | |
D | 200 mm | |
B | 38 mm | |
a | 55,1 mm | |
Da | 183,5 mm | Tolerance: H12 |
da | 126,5 mm | Tolerance: h12 |
Etk max | 148,7 mm | |
Etk min | 139,7 mm | |
Etk1 max | 148,7 mm | |
Etk1 min | 139,7 mm | |
r1 min | 2,1 mm | |
ra max | 2,1 mm | |
ra1 max | 1 mm | |
rmin | 2,1 mm | |
α | 25 ° | Contact angle |
m | 4,59 kg | ≈ Mass |
Cr | 156000 N | Basic dynamic load rating, radial |
C0r | 100000 N | Basic static load rating, radial |
Cur | 8300 N | Fatigue limit load, radial |
nG Fett | 6000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 9000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 1512 N | Preload force |
FV M | 4905 N | Preload force |
FV H | 10048 N | Preload force |
KaE L | 4410 N | Lift-off force |
KaE M | 14777 N | Lift-off force |
KaE H | 31257 N | Lift-off force |
ca L | 309 N/µm | Axial rigidity |
ca M | 484 N/µm | Axial rigidity |
ca H | 650 N/µm | Axial rigidity |
Nodes bearings have FAG B7222-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.