FAG B71904-C-2RSD-T-P4S spindle bearings | 20x37x9mm
Also known as : B71904-C-2RSD-T-P4S
- Inside Diameter: 20 mm
- Outside Diameter: 37 mm
- Width: 9 mm
- Basic dynamic load rating: 7.4 kN
- Basic static load rating: 3.2 kN
FAG B71904-C-2RSD-T-P4S Bearing
FAG B71904-C-2RSD-T-P4S Bearing details
Number | B71904-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 20 mm | |
D | 37 mm | |
B | 9 mm | |
a | 8,3 mm | |
Da | 33,5 mm | Tolerance: H12 |
da | 24 mm | Tolerance: h12 |
r1 min | 0,3 mm | |
ra max | 0,3 mm | |
ra1 max | 0,15 mm | |
rmin | 0,3 mm | |
α | 15 ° | Contact angle |
m | 0,038 kg | ≈ Mass |
Cr | 7400 N | Basic dynamic load rating, radial |
C0r | 3200 N | Basic static load rating, radial |
Cur | 330 N | Fatigue limit load, radial |
nG Fett | 43000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 31 N | Preload force |
FV M | 113 N | Preload force |
FV H | 233 N | Preload force |
KaE L | 95 N | Lift-off force |
KaE M | 384 N | Lift-off force |
KaE H | 851 N | Lift-off force |
ca L | 21,6 N/µm | Axial rigidity |
ca M | 39,3 N/µm | Axial rigidity |
ca H | 57,4 N/µm | Axial rigidity |
Nodes bearings have FAG B71904-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.