FAG B71904-E-2RSD-T-P4S spindle bearings | 20x37x9mm
Also known as : B71904-E-2RSD-T-P4S
- Inside Diameter: 20 mm
- Outside Diameter: 37 mm
- Width: 9 mm
- Basic dynamic load rating: 7 kN
- Basic static load rating: 3.05 kN
FAG B71904-E-2RSD-T-P4S Bearing
FAG B71904-E-2RSD-T-P4S Bearing details
Number | B71904-E-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 20 mm | |
D | 37 mm | |
B | 9 mm | |
a | 11,1 mm | |
Da | 33,5 mm | Tolerance: H12 |
da | 24 mm | Tolerance: h12 |
r1 min | 0,3 mm | |
ra max | 0,3 mm | |
ra1 max | 0,15 mm | |
rmin | 0,3 mm | |
α | 25 ° | Contact angle |
m | 0,038 kg | ≈ Mass |
Cr | 7000 N | Basic dynamic load rating, radial |
C0r | 3050 N | Basic static load rating, radial |
Cur | 315 N | Fatigue limit load, radial |
nG Fett | 38000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 37 N | Preload force |
FV M | 170 N | Preload force |
FV H | 384 N | Preload force |
KaE L | 108 N | Lift-off force |
KaE M | 516 N | Lift-off force |
KaE H | 1208 N | Lift-off force |
ca L | 46,7 N/µm | Axial rigidity |
ca M | 83,3 N/µm | Axial rigidity |
ca H | 117 N/µm | Axial rigidity |
Nodes bearings have FAG B71904-E-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, lip seals on both sides, non-contact, restricted tolerances.