FAG B7204-E-T-P4S spindle bearings | 20x47x14mm
Also known as : B7204-E-T-P4S
- Inside Diameter: 20 mm
- Outside Diameter: 47 mm
- Width: 14 mm
- Basic dynamic load rating: 16.5 kN
- Basic static load rating: 7.7 kN
FAG B7204-E-T-P4S Bearing
FAG B7204-E-T-P4S Bearing details
Number | B7204-E-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 20 mm | |
D | 47 mm | |
B | 14 mm | |
a | 14,9 mm | |
Da | 40,5 mm | Tolerance: H12 |
da | 26,5 mm | Tolerance: h12 |
Etk max | 31,7 mm | |
Etk min | 29,6 mm | |
Etk1 max | 31,7 mm | |
Etk1 min | 29,6 mm | |
r1 min | 1 mm | |
ra max | 1 mm | |
ra1 max | 0,3 mm | |
rmin | 1 mm | |
α | 25 ° | Contact angle |
m | 0,103 kg | ≈ Mass |
Cr | 16500 N | Basic dynamic load rating, radial |
C0r | 7700 N | Basic static load rating, radial |
Cur | 790 N | Fatigue limit load, radial |
nG Fett | 30000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 45000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 107 N | Preload force |
FV M | 398 N | Preload force |
FV H | 848 N | Preload force |
KaE L | 313 N | Lift-off force |
KaE M | 1212 N | Lift-off force |
KaE H | 2686 N | Lift-off force |
ca L | 63,7 N/µm | Axial rigidity |
ca M | 106 N/µm | Axial rigidity |
ca H | 146 N/µm | Axial rigidity |
Nodes bearings have FAG B7204-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.