FAG HS71917-C-T-P4S spindle bearings | 85x120x18mm
Also known as : HS71917-C-T-P4S
- Inside Diameter: 85 mm
- Outside Diameter: 120 mm
- Width: 18 mm
- Basic dynamic load rating: 21.2 kN
- Basic static load rating: 17 kN
FAG HS71917-C-T-P4S Bearing
FAG HS71917-C-T-P4S Bearing details
Number | HS71917-C-T-P4S | |
---|---|---|
Type | FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances | |
d | 85 mm | |
D | 120 mm | |
B | 18 mm | |
a | 22,7 mm | |
Da | 114 mm | Tolerance: H12 |
da | 92 mm | Tolerance: h12 |
Etk max | 99,9 mm | |
Etk min | 98,5 mm | |
Etk1 max | 99,9 mm | |
Etk1 min | 96 mm | |
r1 min | 1,1 mm | |
ra max | 0,6 mm | |
ra1 max | 0,6 mm | |
rmin | 1,1 mm | |
α | 15 ° | Contact angle |
m | 0,572 kg | ≈ Mass |
Cr | 21200 N | Basic dynamic load rating, radial |
C0r | 17000 N | Basic static load rating, radial |
Cur | 1720 N | Fatigue limit load, radial |
nG Fett | 15000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 24000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 74 N | Preload force |
FV M | 221 N | Preload force |
FV H | 442 N | Preload force |
KaE L | 220 N | Lift-off force |
KaE M | 689 N | Lift-off force |
KaE H | 1433 N | Lift-off force |
ca L | 55,9 N/µm | Axial rigidity |
ca M | 87,4 N/µm | Axial rigidity |
ca H | 119 N/µm | Axial rigidity |
Nodes bearings have FAG HS71917-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.