FAG B7217-E-T-P4S spindle bearings | 85x150x28mm
Also known as : B7217-E-T-P4S
- Inside Diameter: 85 mm
- Outside Diameter: 150 mm
- Width: 28 mm
- Basic dynamic load rating: 93 kN
- Basic static load rating: 57 kN
FAG B7217-E-T-P4S Bearing
FAG B7217-E-T-P4S Bearing details
Number | B7217-E-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 85 mm | |
D | 150 mm | |
B | 28 mm | |
a | 41,5 mm | |
Da | 138 mm | Tolerance: H12 |
da | 98 mm | Tolerance: h12 |
Etk max | 113,2 mm | |
Etk min | 106,6 mm | |
Etk1 max | 113,2 mm | |
Etk1 min | 106,6 mm | |
r1 min | 2 mm | |
ra max | 2 mm | |
ra1 max | 1 mm | |
rmin | 2 mm | |
α | 25 ° | Contact angle |
m | 1,81 kg | ≈ Mass |
Cr | 93000 N | Basic dynamic load rating, radial |
C0r | 57000 N | Basic static load rating, radial |
Cur | 5400 N | Fatigue limit load, radial |
nG Fett | 8000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 13000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 864 N | Preload force |
FV M | 2869 N | Preload force |
FV H | 5921 N | Preload force |
KaE L | 2520 N | Lift-off force |
KaE M | 8657 N | Lift-off force |
KaE H | 18466 N | Lift-off force |
ca L | 233 N/µm | Axial rigidity |
ca M | 369 N/µm | Axial rigidity |
ca H | 497 N/µm | Axial rigidity |
Nodes bearings have FAG B7217-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.